ratetmr n

Sets the required network rate test timer of the device. This is used to configure the modem to test for an available EV-DO network while it is in a 1xRTT connection.
This command is valid for Sierra Wireless CDMA/EV-DO data devices and modules only.

n = 0 disable the timer (default)
n = 1 to 65535time in seconds. Note that time in second is an approximate value; the time between periods will be greater than the “n” value set

Examples:

  1. During a 1xRTT connection the modem will disconnect approx. every 120 seconds and then reconnect on the EV-DO network if available, otherwise it will reconnect on the 1xRTT network :
    cmd ratetmr 120

See also: Cellular

Last modified 7 years ago Last modified on 12-12-26 08:17:24 AM