ratesel n
Sets the required network rate mode (CDMA vs. EV-DO) of the device.
This command is not valid for GSM/GPRS/HSPA devices.
| n = 0 | 1xRTT only
|
| n = 1 | EV-DO only
|
| n = 2 | Auto Rate Select (hybrid mode) - default
|
Notes:
- Prior to using the this command, verify that the modem is in manual connection 'cmd mode 1'.
- Entering cmd ratesel without parameters will return an “ERROR”, this is normal operation.
- this command is valid for Sierra Wireless CDMA/EV-DO data devices and modules only
- The Sierra Wireless AC580 (EV-DO revision 0, Cardbus device) only supports cmd ratesel 2
Examples:
- Set the network rate mode to 1xRTT only
cmd ratesel 0
See also: Cellular