pulse input n l h

Set voltage thresholds for pulse counting using voltages. This is the default pulse counting method.

n = 1 to 8Input to configure
l = 0 to 10000Minimum mV to consider 'low' has been reached (Default 2000)
h = 0 to 10000Minimum mV to consider 'high' has been reacvhed (Default 3000)

Examples:

  1. Set pulse counting for INPUT 5 when voltage toggles between 1 and 8 V :
    cmd pulse input 5 1000 8000

See also: General Purpose IO


Firmware revision 2.3.2.5251-115

Last modified 4 years ago Last modified on 16-07-07 03:24:18 PM