ppp

Provide the connected device a PPP connection through the serial port.

Notes:

• To escape from this mode and return to the command line, type EXIT in the terminal program.
• When the modem is configured for PPP mode, the IP addresses used in the serial PPP connection will use the same subnet as the modem's Ethernet LAN IP, after configuring using lanip. For example, if the modem was configured with a LAN IP of 192.168.6.1, the serial PPP connection will use 192.168.6.200 and 192.168.6.202 as the IP addresses for the serial PPP client and the modem, respectively.
• When using cmd ppp, the modem's DHCP server IP pool, configured using landhcp, must not include the range x.x.x.200 - x.x.x.202.

Examples:

1. Start the modem into PPP mode:
   cmd ppp

See also: Serial Port Settings

• Before firmware revision 1.3.0.1779: Dial string for EVDO modems is #777 and the dial string for HSPA modems is *99*1#
• After firmware revision 1.3.0.1779: Dial string of #777 is used for all serial PPP connections