obdreport n r1 [r2] [r3] [r4] [r5] [r6] [r7] [r8]

This command sets the report(s) to be used for a OBD triggered report.

n = 1 to 8	OBD trigger condition number
r1 to r8 = 1 to 999	report number
r1 to r8 = 1020 to 1027	(Firmware 3034 and above) GPS reports 1 to 8
r1 to r8 = 1040 to 1047	(Firmware 3034 and above) I/O reports 1 to 8

Examples:

Set general report #1, #2 and #4 for OBD triggered report #1 :
cmd obdreport 1 1 2 4
Set I/O report #1 (1040) and general report #5 for OBD triggered report #2 :
cmd obdreport 2 1040 5