obdlistload pobdX filename url [username] [passwd]

This loads the list of parameters to be used with cmd pobdX all

pobdX=a\|A to h\|H	Set which pobdX the list belongs to
filename	Name of the list to load
url	Address of the FTP or HTTP server, can also be an IP address, prefixed by ftp:// or http:// respectively. If no prefix is specified (eg. cypress.bc.ca) then ftp:// is used.
username	Username to access FTP server (ignored when url is prefixed by http://)
passwd	Password to access FTP server (ignored when url is prefixed by http://)

Notes:

The command requires 5 parameters when accessing an FTP server or 3 parameters when accessing an HTTP server.
The list is a text file containing parameters to use or ignore, in the format of one p# per line:
```
p1
p2
p10
```
Each line must be terminated by a UNIX line ending (0x0A or <LF>).

Examples:

Saving the list for pobda where new-pobda.txt is the list, cypress.bc.ca is the FTP server, guest is the username of the FTP server and guestpw is the password of the FTP server :
cmd obdlistload a new-pobda.txt cypress.bc.ca guest guestpw

See also: Engine Diagnostics Support

Firmware revision 2.0.5.4103

Last modified 6 years ago Last modified on 14-07-08 03:34:52 PM