modemmodedhcp n
Configures the modem to use DHCP when configured for "half bridge mode"
| n = 0 | modem mode will not use DHCP (default for r2.0.5.3034 and earlier)
|
| n = 1 | modem mode will use DHCP (default for r2.0.5.3041 and later)
|
Notes:
- The client computer's Ethernet settings must be configured to use DHCP to obtain an IP address automatically
- For r2.0.5.3034 and earlier: If modemmodedhcp is enabled, the client computer mac address must also be configured using cmd clientmac
Examples:
- Use DHCP with modem mode :
cmd modemmodedhcp 1
See Also: Half Bridge