ipsec nattkeepalive n

Set the IPsec NAT traversal (NAT-T) keepalive interval. This is the interval between sending NAT-T keepalive packets.

n = 0 Disable sending of NAT-T keepalive packets
n = 1 to 3600 NAT-T keepalive interval in seconds (Default: 20 seconds)

Examples:

  1. Set the IPsec NAT-T keepalive interval to 5 minutes (300 seconds) :
    cmd ipsec nattkeepalive 300

See also: IPsec

Firmware revision 1.3.0.1994

Last modified 7 years ago Last modified on 12-12-20 10:59:35 AM