ipsec dpddelay n

This option activates the DPD (Dead Peer Detection) and sets the time (in seconds) allowed between 2 proof of liveliness requests.

n = 0 disables DPD monitoring, but still negotiates DPD support.(Default)
n = 1 to 3600 defines the DPD delay in seconds.

Examples:

  1. Set DPD delay time to 300 seconds :
    cmd ipsec dpddelay 300

See also: IPsec

Last modified 7 years ago Last modified on 12-12-20 09:58:18 AM