fuel maxspd n

Sets the maximum speed to allow fuel level reading.

n = 0Disables checking for maximum speed
n = 1 to 100n/10 is the maximum speed at which fuel level is still used (Default 5)

Examples:

  1. Configure the maximum speed to use fuel level to be 0.1km/h :
    cmd fuel maxspd 1

See also: Fuel Rate, Vehicle Support, OBD2/J1939 Parameters Table

Firmware revision 2.3.2.2542

Last modified 4 years ago Last modified on 16-07-05 02:12:18 PM