confdrop

When used, this command will look for the following configuration file: /tmp/ctm200-config.tgz

Notes:

• All previous command configuration will be overwritten by the contents of ctm200-config.tgz
• The firmware revision of the CTM-200(s) applying AND dropping the config must be identical.
• A powercycle (cmd pwr mode 2) is required for this command to take effect.

Examples:

1. Save the configuration on a CTM-200 (this will create /tmp/ctm200-config.tgz) :
   cmd modemid CYPRESS
   cmd save

2. Copy the ctm200-config.tgz file created in Example 1 to another CTM-200's /tmp directory, and run the following command :
   cmd confdrop
   cmd pwr mode 2
   

   / # cmd modemid
   cmd modemid CYPRESS
   

See also: Device Management, save

Firmware revision 2.0.5.3015