bt obd n

Enables/disables Bluetooth OBD mode.

n = 0	Disable Bluetooth OBD mode (Default)
n = 1 to 8	Enable Bluetooth OBD mode and use remname/rempin pair 1-8 for OBD polling

Notes:

Bluetooth OBD mode should be used with cmd bt enable 1.
In order to use J1939 protocol, cmd obdsp 10 should be used.

Example:

Enable Bluetooth OBD and use the remote Bluetooth device 2 :
cmd bt obd 2

See also: Bluetooth

Firmware revision 2.0.5.2959

Last modified 7 years ago Last modified on 12-12-28 10:32:34 AM