aux polltim i n [f]

This command sets the timeout for each polling command when polling in mode 23.
In mode 23, a message without the payload will still be sent, even if nothing was received (delimiters and auxiliary device name will still be sent.)

i = 0 to 65535	Polling interval in seconds (Default 0)
n = 0 to 30000	Mode 23: Timeout in 10ms increments (Default 400) Mode 24: Timeout in 0.25ms increments (Default 400)
f = 0 or 1	Timeout enforced (Default 0)

Notes:

If timeout is enforced (f=1), a device will time out after the specified time
If f=0, a device is timed out when the time since last received byte is greater than the configured aux polltim

Examples:

Set the timeout for the CS-440 device (4s) :
cmd aux polltim 0 400

Set the timeout for the Dickey John device (200ms) :
cmd aux polltim 0 20 1

Set the timeout for Epomaster (300ms) :
cmd aux polltim 0 1200 0