aux pollstr str

This command sets the polling string that is sent if configured when cmd aux pollnow is executed when in mode 23.

str = string (max 20 chars)	Polling string (Default blank)
str = auxpollstr.txt	Use polling commands stored in auxpollstr.txt (cmd aux)
str = aux2pollstr.txt	Use polling commands stored in aux2pollstr.txt (cmd aux2)
str = aux3pollstr.txt	Use polling commands stored in aux3pollstr.txt (cmd aux3)

Notes:

If using auxpollstr.txt, the file must be located in /var/config (R1) or /var/data/ctm (R2) before this command is set.

Examples:

Configure to use a list of polling commands for Dickey John device :
cmd aux pollstr auxpollstr.txt