accel rollrep r1 [r2] [r3] [r4] [r5] [r6] [r7] [r8]

This command sets the report(s) to be used for rollover triggered report.

r1 to r8 = 0Disables the report (Default)
r1 to r8 = 1 to 999Report number

Example:

  1. Set reports #2 and #100 for rollover triggered report #1 :
    cmd accel rollrep 2 100

See also: Acceleration

Firmware revision 2.0.3.4013

Last modified 5 years ago Last modified on 14-12-11 04:29:51 PM