accel report n r1 [r2] [r3] [r4] [r5] [r6] [r7] [r8]

This command sets the report(s) to be used for an acceleration triggered report.

n = 1 to 8	Acceleration trigger condition
r1 to r8 = 0	Disables the report (Default)
r1 to r8 = 1 to 999	Report number

Notes:

For accel report to function properly when accel sensor 1 is set, the CTM must be configured using the commands accel cond, accel sensor, and orientation.

Example:

Set reports #2 and #100 for acceleration triggered report #1 :
cmd accel report 1 2 100