Message Type 34, $PSIG
Proprietary NMEA message containing a summary of current cellular network parameters.
Message format is:
$PSIG,id=<id>,sqi=<sqi>,rat=<rat>,reg=<reg>,roam=<roam>,ipv4=<ipv4>*hh<CR><LF>
For this message, each field is pre-pended with a descriptor, ie sqi=<sqi>. All fields are comma delimited.
| Parameter | Description | Range | <Unknown> if |
|---|---|---|---|
| <id> | Device IMEI/MEID (modem ID) | 11-15 (hex-)digits | "00000000000" |
| <sqi> | Signal Quality Index | 0 - 100 (in %) | 9999 |
| <rat> | Radio Access Technology (Network Type) | "CDMA" | "EVDO" | "EVDO-RevA" | "eHRPD" | "GSM" | "GPRS" | "EDGE" | "UMTS" | "HSDPA" | "HSUPA" | "HSPA" | "HSPA+" | "DC-HSPA" | "LTE" | "unknown" |
| <reg> | 'Registered' flag | 0 = no | 1 = yes | 9999 |
| <roam> | Roaming status | 0 = no | 1 = roaming | 9999 |
| <ipv4> | Uplink IPv4 Address | "a.b.c.d" | "unknown" |
Example:
$PSIG,id=012626001379047,sqi=48,rat=HSPA,reg=1,roam=0,ipv4=173.182.111.70*19[0x0D][0x0A]
Last modified 5 years ago
Last modified on 14-09-15 10:05:00 AM