dyndns user password domain <service provider> <custom URL>
Configure the CTM gateway device to perform regular updates to the Dynamic Domain Name Service.
This feature creates an alias from a dynamic IP address to a static hostname allowing the CTM to be more easily accessed over the Internet for remote configuration or for end application.
| user | Username for the DYNDNS service.
|
| password | Password for the DYNDNS service.
|
| domain | Domain (hostname) name for the DYNDNS
|
| service provider | Configure the DynDNS service provider 1=changeip.com, 2=dyndns.org (default), 3=no-ip.com, 4=zoneedit.com, 5=custom DDNS
|
| custom URL | If service provider is specified as custom type 5, the DDNS URL must be provided here.
|
Notes:
- By default this feature is disabled.
- Default service provider is dyndns.org (type 2)
- For this feature to work, the CTM requires a public IP address.
- DYNDNS updates can be disabled by setting cmd dyndns 0 0 0.0.0.0
- After disabling DYNDNS updates, the hostname will continue to point to the last IP address of the modem. For instructions on clearing the IP address associated with the hostname, please refer to DYNDNS documentation for details on using the offline hostname feature.
Examples:
- Set the user name, password and the domain name :
cmd dyndns cypressdemo cypress cypresscamera2.dyndns.org
- Disable DYNDNS updates :
cmd dyndns 0 0 0.0.0.0
- Set a custom DDNS service:
cmd dyndns cypressdemo cypress camera2.mydns.com 5 mydns.com